top of page
Search

How Can You Reduce Warehouse Travel Time?

Nov 14
10 min read

Last Updated: November 14, 2026

Quick Summary

You reduce warehouse travel time by measuring it first, then re-slotting fast-moving items near the pick face and dispatch, tightening pick paths within your current layout, and applying batch, zone, or wave picking where your order profile supports it. Fix location accuracy before any slotting or routing change, and track travel minutes per pick alongside picks per hour so you can confirm the gain is real.

  • Define travel time in writing and brief every observer so your baseline is not noise.

  • Sample at least one day shift and one night shift, plus a typical day and a peak day.

  • Slot by pick frequency, not unit volume, since a cheap item picked ten times daily costs more travel.

  • Moving A items to the prime pick face shortens pick travel but lengthens restock travel.

  • Fix location accuracy first, because no slotting or routing change holds without trusted location data.

Still losing hours to picker walking?

We help distribution teams cut travel time and make the gains stick.

Table of Contents

Why Warehouse Travel Time Is the First Place to Look

Most warehouses do not have a picking problem. They have a walking problem.

That is why warehouse travel time is often the first place to look when a distribution center wants better throughput without adding headcount.

Below, we break down how to reduce warehouse travel time: how to measure it, how to fix layout and slotting, which picking methods cut walking, and where the trade-offs sit.

Start With Warehouse Travel Time Measurement

You cannot cut what you have not counted. Warehouse travel time measurement tracks how long pickers spend moving between locations versus picking, counting, and packing.

You do not need new software to start, a clipboard and stopwatch will do for week one. What you need is a consistent definition, a representative sample, and segmentation that tells you which lever to pull.

Define Travel Time Before You Measure It

Measurement efforts often fail at the definition stage. Decide up front what counts as travel and what does not, then apply the same rule every time. A workable definition for most manual operations:

  • Travel time: any time a picker is moving between pick locations, between a pick location and a staging or dispatch area, or between zones, whether walking or riding equipment.

  • Exclude: time at the pick face spent selecting, scanning, counting, or labeling; time waiting for a system prompt; time spent searching for a misplaced item (log that separately as search time).

  • Record separately: replenishment travel, putaway travel, and travel to and from breaks or equipment storage. These are real costs but they respond to different fixes.

Write the definition down and brief every observer. If two people time the same pick with different rules, your baseline is noise.

Build a Representative Baseline

A single shift is not a baseline. Sample across the variables that change travel:

  • Shifts: at least one day shift and one evening or night shift if you run them.

  • Order profiles: a mix of small single-line orders, multi-line orders, and any large or bulky orders.

  • Zones: sample pickers who work different areas of the building, not just the busiest aisle.

A practical starting sample is a small number of pickers observed for a full hour each, repeated across several days, which is enough to see an average and a range without turning measurement into a full-time job.

Segment the Number So It Tells You Something

A single "travel is 55% of pick time" figure gets attention but is useless for deciding what to change. Break the baseline into segments:

  • By task: picking versus replenishment versus putaway versus packing.

  • By zone or aisle: which areas generate the most travel minutes per pick.

  • By order type: single-line versus multi-line, small versus large.

Segmentation is where the fix usually reveals itself. Travel concentrated in a few aisles points to slotting; travel concentrated in zone handoffs points to picking method; travel that is really mislabeled search time points to location accuracy.

Validate Improvements With Repeatable Measurements

Before you change anything, agree on how you will measure the result: same definition, same sample size, same segmentation. A post-change sample taken only on a slow Tuesday will flatter any project.

A simple validation protocol:

  • Re-measure the same zones, shifts, and order types you baselined

  • Collect at least as many observations as the baseline

  • Track picks per hour and travel minutes per pick together, one without the other can mislead

Watch out: teams often declare victory on a single good week. A change that cuts travel in one aisle but pushes congestion into the next has not reduced total travel, it has moved it.

Track Travel-Time Data Without New Software

A common mistake is buying a warehouse management system before understanding the problem. Start manual.

  • Map the layout on paper and mark pick locations

  • Time 20-30 picks with a stopwatch and note start/end locations

  • Log data in a spreadsheet by picker, shift, zone, and order type

After a few weeks of data, you will know whether travel is the real cost or whether search time and stockouts are the bigger drain. If you later invest in systems that capture labor and travel data automatically, explore the supply chain and labor management services that fit your operation.

Analyze Movement Patterns and Warehouse Flow

Data tells you travel is expensive. Movement patterns tell you where it is expensive. Walk the floor during a busy pick wave and watch the routes pickers actually take, not the ones the layout intends.

Look for three things:

  • Hot spots: aisles where pickers bunch up and wait

  • Dead runs: long walks to rarely picked items

  • Backtracking: pickers passing the same location twice in one order

You will usually find that a small number of locations cause most of the walking. For a deeper look at how order flow connects to the routes pickers take, see how to optimize your order fulfillment process.

What Warehouse Slotting Optimization Actually Changes

Warehouse slotting optimization is the process of deciding which products go in which locations based on how often they are picked.

The principle is simple: fast-moving items belong near the pick face and dispatch, slow movers belong further back.

Warehouse associate organizing fast-moving products to reduce warehouse travel time while a supervisor reviews slotting

Moving Fast-Moving Items Near the Pick Face

Pull your order history and rank products by pick frequency. Then re-slot in tiers:

  • A items (highest velocity): prime pick-face locations, waist height, closest to dispatch

  • B items (medium): mid-aisle, still easy to reach

  • C items (slow): back of the warehouse, higher or lower shelves

What most guides miss: slot by pick frequency, not unit volume. A cheap item picked ten times a day costs more travel than an expensive item picked once a week.

Warehouse Layout Optimization Within Real Constraints

Most operations cannot knock down walls. Warehouse layout optimization within real constraints means working with the building you have, rethinking aisle direction, pick-face placement, and dispatch proximity rather than a full redesign.

Practical moves that fit most facilities:

  • Shorten the pick face so pickers cover less ground per order

  • Place dispatch near the highest-velocity zone to cut the final walk

  • Widen key aisles where congestion slows pickers down

If you want to see how a hands-on process and layout redesign engagement works, review the supply chain optimization approach that reconfigures flow around your actual building.

Warehouse Picking Methods That Cut Walking Distance

The picking method you choose sets a hard ceiling on how far pickers walk. Warehouse picking methods that reduce travel fall into three main families, and each trades off differently.

Batch, Zone, and Wave Picking Compared

Method

How It Works

Cuts Travel By

Best For

Batch picking

One picker collects the same item for many orders at once

Fewer trips per item

Many small, similar orders

Zone picking

Each picker owns a zone; orders pass between zones

Confining walkers to one area

Large facilities with distinct zones

Wave picking

Orders released in timed groups

Coordinating picks and smoothing congestion

Operations with scheduled dispatch

Batch picking shines when orders share common items. Zone picking wins when your building is big enough that crossing it is the real cost. Wave picking controls when the floor gets busy, reducing the congestion that quietly adds walking time.

If you want to see where automation and AI could take travel reduction further, read how AI will help with warehouse efficiency.

Prioritize Orders and Coordinate Work Dynamically

Static routes only work when demand is static. It rarely is. Dynamic work prioritization means releasing and sequencing orders based on current floor conditions, not a fixed morning plan.

Three ways to coordinate better:

  • Release orders in smart waves so pickers are not all in the same aisle at once

  • Prioritize by due time and location so urgent picks are also efficient picks

  • Rebalance workloads across pickers as the shift unfolds

This is where measurement pays off. With a baseline and live data, you can see congestion building and shift work before it costs you. The goal is steady, repeatable throughput, not a heroic sprint followed by a slow afternoon.

Trade-Offs, Failure Modes, and the ROI Question

Every travel-reduction change has a catch. Slotting fast movers near the pick face works, until replenishment has to travel further to restock them. Batch picking cuts trips, until orders get too varied to batch cleanly. Zone picking confines walkers, until handoffs between zones create new delays.

The failure modes we see most often:

  • Re-slotting once and never again. Demand shifts; your slotting should follow it.

  • Buying software before fixing process. The data sits there and nobody changes how they work.

  • Chasing distance without watching congestion. A shorter route through a jammed aisle is still slow.

A Prioritized Implementation Sequence

Broad recommendations are easy; sequencing them is where projects succeed or stall. A practical order for most manual operations:

  1. Fix location accuracy first. If pickers cannot trust the location data, no slotting or routing change will hold. Assign an owner, set a weekly cycle-count target, and measure search time before and after.

  2. Re-slot the top movers. Start with the highest-frequency items only. Pilot in one zone, measure travel minutes per pick, then scale.

  3. Tighten pick paths within the current layout. Shorten the pick face, place dispatch near the highest-velocity zone, and group related items, low-capital changes that can run in parallel with slotting.

  4. Introduce batch or zone picking where the order profile supports it. Pilot with a defined order type, set a clear success threshold, then expand.

  5. Add dynamic order release and workload balancing. This depends on earlier steps being stable; releasing orders dynamically into a poorly slotted floor just moves congestion around.

For each step, name an owner, set a review date, and define the pilot scope and scaling criteria. A change that cannot state its success threshold in advance is a change you cannot evaluate.

Quantifying the Financial Impact

Reduced walking is not the outcome that matters to the business, labor capacity, throughput, and cost per order are. Translate the travel number into those terms before you ask for budget.

The translation chain:

  • Travel minutes saved per pick × picks per shift = labor minutes freed per picker per shift.

  • Labor minutes freed ÷ minutes in a productive hour = equivalent labor hours recovered.

  • Labor hours recovered × loaded hourly labor cost = labor cost avoided or capacity gained.

Worked as a hypothetical: if a change saves two minutes of travel per pick and a picker completes 100 picks per shift, that is 200 minutes, roughly three and a third hours, freed per picker per shift. At $25 per loaded labor hour, that is about $83 of capacity per picker per shift. Multiply by pickers and shifts to size the annual opportunity, then compare it to the cost of the change.

Those figures are illustrative only. Use your own baseline, loaded labor rate, and pick counts. The point is the chain, not the number.

Payback and the Criteria for Scaling

Once you have the annualized capacity value, compare it to the full cost of the change: labor for re-slotting, equipment or software, downtime during transition, and the ongoing cost of keeping slotting current.

Set scaling criteria before the pilot:

  • Travel minutes per pick falls by an agreed threshold in the pilot zone

  • Picks per hour does not decline, and error rates do not rise

  • Replenishment travel does not increase enough to erase the pick-travel gain

If the pilot clears those bars, scale. If it clears travel but fails on replenishment or errors, you have found a trade-off to solve, not a result to celebrate.

To pressure-test whether the improvement justifies the investment before you commit, a labor and performance management assessment gives you a structured way to size the return.

Frequently Asked Questions

How do you measure travel time in a warehouse?

Start with a manual baseline: have pickers log start and end times per pick list, or shadow a sample of orders across shifts and record walking segments separately from picking and packing. Warehouse travel time measurement works best when you sample enough orders to see variation by shift, order type, and zone. Compare that baseline against picks per hour and orders per hour so you can tell whether a change actually moved travel distance or just shifted work elsewhere.

What picking method reduces warehouse travel the most?

There is no single winner. Batch picking cuts walking when many small orders share overlapping SKUs, zone picking limits picker movement in large facilities with dense pick faces, and wave picking helps when orders must ship on a schedule. The right choice depends on your order profile: average lines per order, SKU count, and how concentrated demand is. Test one method on a single zone before rolling it out, and measure travel distance and picker productivity against the baseline.

How can warehouse slotting optimization reduce picker travel time?

Slotting puts high-velocity products in the closest, easiest-to-reach locations so pickers spend less time walking to slow-moving items. Pull order history from your warehouse management system, rank SKUs by pick frequency, and move the top movers to the pick face nearest dispatch. Revisit the ranking quarterly, because demand patterns shift and a slotting plan that is never refreshed quietly loses its gains.

Can we reduce travel time without a major facility redesign?

Yes. Most travel-time gains come from slotting, pick path rules, and order prioritization rather than new racking or a building change. You can re-slot a zone, tighten pick paths, and adjust batch sizes inside the existing footprint. Measure a baseline first, change one lever at a time, and confirm the improvement holds across shifts before adding the next change. That sequencing also keeps the work manageable for pickers who have to adopt it.

 
 
 

Comments


bottom of page